Pressure Washing Services

Restore the Exterior of Your Property

Mississippi humidity, shade, traffic, and weather can leave exteriors looking dark, streaked, or stained. Our team uses the right pressure, nozzles, and cleaning solutions for each material to lift buildup and brighten surfaces—while protecting paint, siding, mortar, and landscaping.

Benefits

• - Instantly improves curb appeal and first impressions

• - Removes mold, mildew, algae, and grime safely

• - Helps protect exterior materials and extend surface life

• - Cleaner, safer walkways (less slippery buildup)

• - Boosts property value and pride of ownership

Not sure what you have? Send us a quick photo of the area you want cleaned. We’ll tell you the safest method and what kind of results to expect—before we ever start.

Surfaces We Clean:

Whatever your home or building is made of, we can clean it safely and effectively. We adjust pressure, detergents, and technique to match the material.If it’s outside, we can clean it. Below are the most common materials we work with.

Roof Cleaning (Soft Wash When Needed)

We clean roofs using a safe approach based on the roofing material—removing black streaks, algae, and organic growth without tearing up shingles or forcing water where it doesn’t belong.

Common roof materials we can clean:

• Asphalt shingles (architectural/3-tab)

• Metal roofing (standing seam, corrugated)

• Tile roofs (clay or concrete tile)

• Slate

• Wood shake (when appropriate and inspected first)

• Flat/low-slope commercial roofing surfaces (case-by-case)

If you’re not sure what your roof is made of, we can identify it from a photo or during an on-site look.

House & Building Siding (All Materials)

Different siding needs different pressure and chemistry. We clean the surface thoroughly while protecting finishes, seams, and trim.

Siding materials we clean:

• Vinyl siding

• Hardie board / fiber cement

• Wood siding (lap, board-and-batten, cedar, etc.)

• Brick (painted or unpainted)

• Stucco

• EIFS (synthetic stucco) (case-by-case, method-specific)

• Aluminum siding

• Concrete / CMU block

• Stone veneer / natural stone (method-specific)

• Painted surfaces (method-specific)

Concrete & Flatwork (Driveways, Sidewalks, Parking Lots)

Perfect for high-traffic areas that collect oil, gum, tire marks, algae, and grime.

Concrete areas we clean:

• Driveways

• Sidewalks and walkways

• Patios and porches

• Curbs and gutters (exterior)

• Parking lots and loading areas

• Dumpster pads and service areas

• Breezeways and entryways

Pavers, Brick Walkways & Stone Paths

Pavers and stone can trap dirt, algae, and weeds in joints. We clean them carefully to improve appearance and traction.

Paver/stone surfaces we clean:

• Paver patios

• Paver driveways

• Brick walkways

• Flagstone and stone paths

• Pool decks (method-specific)

Decks, Porches & Outdoor Living Areas

We clean outdoor living spaces to remove grime and organic growth while protecting the surface.

Materials we clean:

• Pressure-treated wood

• Cedar/redwood (method-specific)

• Composite decking (Trex and similar)

• Concrete porches

• Painted/stained decks (method-specific)

Fences & Gates

We clean fencing to remove green growth, dirt, and staining and bring back a clean, uniform look.

Fence materials we clean:

• Wood fencing

• Vinyl fencing

• Aluminum/metal fencing

• Wrought iron (method-specific)

• Composite fencing (method-specific)

Commercial Storefronts & Building Exteriors

Make a strong first impression—especially in high-visibility areas.

Commercial surfaces we clean:

• Storefront sidewalks and entrances

• Building exteriors (brick, stucco, siding, block)

• Walkways and common areas

• Drive-thru and high-traffic lanes (method-specific)

• Sign areas and awnings (material-dependent)